How to correctly remove fluorescent cloth tape?
The key to tearing off fluorescent tape is "slow" and "clever". After heating, slowly peel off to effectively avoid most of the residue.
The tearing steps are as follows:
1.Heating softening
• Heat evenly for 30-60 seconds at a distance of 10-15 centimeters from the tape using the hot air setting of the hair dryer. Be careful not to stop moving to prevent local overheating from damaging the surface.
• Gently touch the tape with your fingertips and feel it warm, which can soften the glue and reduce its stickiness.
2.Find the right angle
• Starting from one corner of the tape, gently lift a small corner with a nail or plastic sheet.
• Maintain a tearing angle of around 60 ° and slowly and evenly apply force to tear in a direction parallel to the adhered surface.
3.Check and clean
• If there are signs of tape breakage or residue, stop immediately and heat again with a hair dryer before continuing.
• If there is slight residue after tearing off, you can gently rub it in one direction with your fingertips and remove it.
If there is still stubborn residue after tearing, it can be removed with alcohol (95% concentration), cooking oil, white vinegar, or professional adhesive remover.
Tear off the fluorescent cloth tape to avoid violent pulling. Violent tearing is the main cause of tape breakage and residue, so it should be heated and slowly torn.
Our company not only produces Gaffer Tape, but also Acrylic Foam Tape,Anti Slip Tape,Reflective Tape,Butyl Rubber Tape,Pavement Marking Tape, Glow In Dark Tape, etc,Looking forward to working with you.