What kind of anti slip tape should be chosen for oil/water environments
The key to choosing anti slip tape in environments with oil stains or water accumulation is to choose industrial grade heavy-duty anti slip tape with "super large abrasive mineral particles" (such as diamond sand and alumina) on the surface. This type of tape is specifically designed for extreme environments, and its rough particles can puncture oil and water films, directly contacting the sole of the shoe, providing reliable grip.
selection criteria
| Consider dimensions | Key requirements | Instructions |
| Surface material | Mineral particles such as diamond, silicon carbide, aluminum oxide, etc | These hard abrasive particles can penetrate water/oil films, providing sustained physical anti slip effect, and are wear-resistant and corrosion-resistant. Ordinary PVC or vinyl anti slip stickers are mainly suitable for barefoot or dry environments, and their effectiveness will be greatly reduced in oily environments. |
| Adhesive backing | High performance acrylic adhesive | Strong acrylic adhesive with oil resistance and waterproof properties must be selected to ensure that the tape remains firmly attached to the ground after long-term contact with oil and water, without curling or falling off. |
| Product structure | Open abrasive pattern | Some high-quality industrial grade tapes adopt an open particle distribution design, which helps liquids flow away from the gaps between particles, preventing dirt and oil from clogging the surface, thus maintaining anti slip effect for a long time and being easy to clean. |
Recommended product types
Preferred: Heavy duty oil/water environment specific type
• Features: This is a "hardcore" solution designed for industrial oil contaminated and humid areas. The surface is made of ultra large particles of diamond sand, which has excellent anti slip effect and is extremely wear-resistant.
Alternative: High performance universal type
• Characteristics: If the environment is mainly flooded or has a small amount of oil pollution, but also needs to balance a certain degree of flexibility and adaptability to different surfaces, this type of product can be considered.
Types to avoid
• Ordinary PVC anti slip tape: This type of tape has a fine surface texture and is mainly used in dry or humid areas such as bathrooms and swimming pools where bare feet walk. It has insufficient anti slip ability for oily environments with shoe soles.
• Transparent/decorative anti slip tape: These products often sacrifice some anti slip performance for aesthetics and cannot cope with harsh oily environments.
Construction and maintenance tips
• Thoroughly clean: Before construction, the floor must be thoroughly cleaned with degreaser or cleaner to remove all oil, dust, and moisture, which is the key to ensuring the long-lasting firmness of the tape.
• Ensure dryness: When pasting, make sure the ground is completely dry. The construction temperature is preferably above 10 ℃ to ensure the optimal fluidity of the adhesive.
• Pressure bonding: After bonding, repeatedly press with a rubber hammer or roller to ensure that the backing adhesive is in full contact with the ground and expel any air bubbles.
• Daily cleaning: Due to the selection of an "open abrasive" structure, daily cleaning only requires rinsing with water or ordinary cleaning agents to avoid dirt blocking the gaps between particles and affecting the anti slip effect.
Our company not only produces Anti Slip Tape, but also Acrylic Foam Tape,Aluminum Foil Tapes,Reflective Tape,Butyl Rubber Tape,Pavement Marking Tape, Glow In Dark Tape, etc,Looking forward to working with you.